国精产品一二三区传媒公司,丰满人妻熟妇乱偷人无码,国产精品亚洲专区无码牛牛,日韩无码电影

歡迎進入山東恒能環保能源設備有限公司

熱線電話

0531-69953988

分類導航
產品展示
聯系我們
山東恒能環保能源設備有限公司

聯系電話:18678860671

服務熱線:0531-69953988

聯系地址:中國(山東)自由貿易試驗區濟南片區孫村街道經十東路33688號章錦綜合保稅區聯東U谷科創中心5號樓 101

沼氣火炬燃燒排放前要做的沼氣脫硫的作用!

氧氣,氫氣,氮氣等氣體不同,沼氣其實是一種混合氣體,其主要組成成分包括甲烷,二氧化碳,硫化氫,水蒸氣等,不同方式產生的沼氣中各成分的比例會有所不同,但主要成分都是甲烷即CH4,因此,沼氣可燃燒,并且可以作為一種可再生能源使用。

Oxygen, hydrogen, nitrogen and other gases are different. Biogas is actually a mixed gas, and its main components include methane, carbon dioxide, hydrogen sulfide, water vapor, etc. The proportion of each component in biogas produced by different methods may vary, but the main component is methane, which is CH4. Therefore, biogas can be burned and can be used as a renewable energy source.

在沼氣的這些組成成分中,硫化氫氣體即H2S,本身具有臭味,而且對人體有害,并且能溶于水形成氫硫酸,對沼氣設備也會產生腐蝕性,所以在利用沼氣或者進行燃燒排放前需要利用相關設備盡可能地去除硫化氫。這一步處理就被稱為沼氣脫硫。

Among these components of biogas, hydrogen sulfide gas, also known as H2S, has a foul odor and is harmful to human health. It can dissolve in water to form hydrosulfuric acid, which can also cause corrosion to biogas equipment. Therefore, before using biogas or conducting combustion emissions, it is necessary to use relevant equipment to remove hydrogen sulfide as much as possible. This step of treatment is called biogas desulfurization.

20230315044454925.png

目前可以實現工業化運行的脫硫方法主要有三種,分別是干法脫硫,濕法脫硫和生物脫硫:

There are currently three main desulfurization methods that can achieve industrial operation, namely dry desulfurization, wet desulfurization, and biological desulfurization:

1、干法脫硫常用于低硫量沼氣的處理,尤其適合于中小型的沼氣工程,比如養殖場沼氣池、垃圾填埋場填埋氣處理、污水處理廠曝氣池的沼氣處理等,因為其設備結構結構簡單,維護方便,幾乎不需要專業人員進行操作,只需要定期對脫硫劑進行再生和更換即可。目前市面上干法脫硫的脫硫劑一般采用氧化鐵顆粒,因為其成本較低,而且再生操作簡單。其他脫硫劑如氧化鋅、活性炭等因為無法再生,脫硫后只能進行廢棄處理,不僅容易造成環境問題,還會提高脫硫成本。

1. Dry desulfurization is commonly used for the treatment of low sulfur biogas, especially suitable for small and medium-sized biogas projects, such as biogas tanks in breeding farms, landfill gas treatment in garbage landfills, and biogas treatment in aeration tanks in sewage treatment plants. Due to its simple equipment structure, easy maintenance, and almost no need for professional personnel to operate, it only requires regular regeneration and replacement of desulfurizers. At present, the desulfurizer for dry desulfurization on the market generally uses iron oxide particles because of their lower cost and simple regeneration operation. Other desulfurizers such as zinc oxide and activated carbon cannot be regenerated and can only be disposed of after desulfurization, which not only causes environmental problems but also increases desulfurization costs.

2、濕法脫硫是將沼氣送入特定溶劑中去除H2S的過程,一般是適用石灰石或石灰的漿液作為脫硫劑,濕法脫硫的脫硫率一般大于90%,而且處理量大,適用于大型沼氣工程。但是濕法脫硫的缺點也比較明顯:初期的投資費用高、運行費用高、占地面積大、系統操作復雜需要專人維護,副產物——石膏和廢水都比較難處理。

2. Wet desulfurization is the process of sending biogas into a specific solvent to remove H2S. Generally, limestone or lime slurry is used as a desulfurizer. The desulfurization rate of wet desulfurization is generally greater than 90%, and the processing capacity is large, making it suitable for large-scale biogas projects. However, the drawbacks of wet flue gas desulfurization are also quite obvious: high initial investment costs, high operating costs, large footprint, complex system operation requiring dedicated personnel to maintain, and difficult to treat by-products such as gypsum and wastewater.

3、生物脫硫又稱生物催化脫硫(簡稱BDS),是一種新式的沼氣脫硫方式,在常溫常壓條件下利用特定種類的細菌進行生物處理脫硫。生物脫硫技術包括生物過濾、生物吸附和生物滴濾法。這三個系統是開放的,它們的微生物種群會隨著環境的變化而變化。在生物脫硫過程中,氧化硫污染物應通過生物還原生成硫化物或H2S,硫元素應通過生物氧化生成單質硫之后去除。

3. Biological desulfurization, also known as biocatalytic desulfurization (BDS), is a new type of biogas desulfurization method that utilizes specific types of bacteria for biological treatment and desulfurization under normal temperature and pressure conditions. Biological desulfurization technology includes biological filtration, biological adsorption, and biological drip filtration. These three systems are open, and their microbial populations will change with changes in the environment. In the process of biological desulfurization, sulfur oxide pollutants should be bioreduced to generate sulfides or H2S, and sulfur elements should be removed after generating elemental sulfur through biological oxidation.

通過自動化技術的應用,實現了金屬板材加工的高效率和高精度。

Through the application of automation technology, high efficiency and precision in metal sheet metal processing have been achieved.

本文由沼氣脫硫提供技術支持,更多的詳細精彩內容請點擊我們的網站 http://m.chinaktws.com我們將會全心全意為您提供滿意的服務。

This article provides technical support for biogas desulfurization. For more detailed and exciting content, please click on our website http://m.chinaktws.com We will wholeheartedly provide you with satisfactory service.

相關產品 我們的存在,是為了更好的服務于沼氣等可燃氣體凈化及利用行業